首页 > 网络和系统设置参考 > 监控和配置机器 > 使用telnet进行远程维护 > etherconfig
使用“etherconfig”命令可查看和配置以太网参数。
查看设置
msh> etherconfig
指定以太网速度
msh> etherconfig speed {auto|10f|10h|100f|100h}
auto=自动选择
10f=10 Mbps全双工
10h=10 Mbps半双工
100f=100 Mbps全双工
100h=100 Mbps半双工
默认值为“auto”。