首页 > 网络和系统设置参考 > 监控和配置机器 > 使用telnet进行远程维护 > slp
使用“slp”命令查看和配置SLP设置。
msh> slp ttl "ttl_val[1-255]"
可用SLP在NetWare 5/5.1的PureIP环境中搜索NetWare服务器。使用“slp”命令,可以配置用于SLP组播套件的TTL值。
TTL 的默认值为 1。搜索只能在本地段内执行。如果路由器不支持组播,即使增大TTL值,也不能使用这些设置。
可接受的TTL值介于1至255之间。
此命令仅在安装了NetWare时可用。